欢迎来到中山星斯达喷雾阀有限公司官方网站!

推阀E阀门

推阀E阀门
  • 产品介绍

                                      ZHONGSHAN   KOSTAR VALVE CO.,LTD.
                                                中山星斯达喷雾阀有限公司
 
1536547915104009673.png
项目
ITEM   
项目参数
ITEM PARAMETER
说明       
DESCRIPTIONS                                                    
封口杯
Mounting Cup
材质(Material)马口铁本色盖,清漆盖、铝盖
Tinplate Plain (without Retention)、Varnish Cup、Aluminum Cup)
阀芯 
STEM
材质(Material)    聚甲醛(Polyacetal)                    
孔径(Orifice Dia)1*0.5mm
垫圈    
GASKET
外垫圈(Outer Gasket)丁腈(BUNA-N)
内垫圈(Inner   Gasket)1-氯丁(I.e   Neoprene)
3-丁钠(Buna)
5-丁基(Butyl)
7-氯丁基(Cholobutyl)
阀体      
BODY
材质(Material)聚甲醛(Polyacetal)
气相横孔径    
    (Gas Orifice Diameter) 
无No(0mm)、0.3mm
流量孔径
    (Flow Orifice Diameter)
2.5mm
吸管   
DIPTUBE
材质(Material)低密度聚乙烯(Low   Density Polyethylene)
长度(Length)实产按客户需求,长度测量:外垫圈至引液管底部                                        Products As Per Customer's Requirement,Measuring Method:From the Outer   Gasket to the Diptube bottom
喷头 
ACTUATOR
材质(Material)HDPE、PP
喷头孔径(Orifice   Dia) 0.45mm(白色WHITE)
0.60mm(白色WHITE、黄色YELLOW)
0.80mm(蓝色BLUE)
说明:中山星斯达努力为用户提供最好的阀门。由于气雾剂的内容物各具不同的特性,所以用户在使用之前必须对气雾剂的适用性加以试验,一经采用的阀门如气雾剂的内容物、抛射剂,溶剂,香剂等有任何改变时,请务必重新进行适用性试验。
    Comments:This aerosol valve specification has been designed and developed   for a particular formulation and spray characteristic only, Any change in   propellant,actives,solven or any other produce ingredient may make this valve   non compatible or unsuitable. KOSTAR endeavors to provide the most   appropriate aerosol valve to users has no responsible for testing its   compatibility and suitability.



上一页
下一页